Hello guys today ill talk about how to reset your engine to the Factory setting by useing
HSN = High Speed Needle
LSN = Low Speed NeedleGO .28 3 Port
HSN - 3.25-3.5 turns out from fully in.
LSN - 1 turn in from flush
IDLE - 1mm gap
Hot Bodies .26 Powerhouse
HSN - 3.5 Turns from fully closed.
LSN - 3.5 Turns from fully closed.
Idle - 1mm open.
Kyosho GX21 Engine
HSN - 4 Turns out from fully closed
LSN - 0.5mm in from flush on valve
IDLE 1mm Gap in carb
LRP Z.28 Spec 3
HSN - 3.75 Turns From Closed
LSN - 3.75 Turns From Closed
IDLE Gap between 0.5mm and 1.0mm open
Mach 427 (lst2 and muggy)
HSN - 4 turns out from bottom
LSN - 2,5 turns out from bottom
OS .21 V-spec
HSN - 3 Turns out from fully closed
LSN - Flush on valve
IDLE 1mm gap in carb
RB TM523
HSN - 6 turns from closed
LSN/IDLE Needle - 5 turns from closed
Team Associated / Thunder Tiger 28 Pro Duel Start Engine
HSN - 2.75 turns
LSN - 2/2.5 turns
TRX PRO .15
HSN - 2.5 turns out
LSN - Flush with throttle arm assembly
IDLE 1-1.5mm open
TRX 2.5 & 3.3
HSN - 4 turns out
LSN - flush with valve or 1.5-1.75 turns out
IDLE 0.70-1mm open.
ill search for more information